SHOP PFI
Categories
- Apparel/Merchandise
- BoomSlang Harness
- Boost Solenoid
- Brent's H22 Full Build Kit
- Clutch Masters
- Cylinder Head
- Discounted New/Used Parts
- Drag Cartel Industries/PPG Transmissions
- Electrical
- FCS Race
- Featured
- Fueltech
- Gauges
- Head Gaskets
- Head Studs
- Hondata
- Ignition
- Injectors
- KDN Performance
- Map Sensors
- NitrousExpress
- Spark Plugs
- The PFI Games
- Timing Components
- Turbochargers
- Wiring Harness's
- Y&S Shields
Categories
View cart “SPARKPRO-8 HARNESS” has been added to your cart.
-
10-Cyl Piranha Direct Port Nitrous System (250-500Hp)
- $1,163.51 – $2,441.87
- Select options
-
1150CC INJECTORS (SET OF 4)
- $520.00
- 1000cc injectors, please specify which top hat adapters you need for your application. International Shipping Note: If you are ordering from outside of the United States, please remember to add the "international shipping" item to your cart from the products section.
- Select options
-
16-WAY AUXILIARY CONNECTOR KIT
- $6.00
- This connector kit is compatible with the following products: FT500LITE/500 Auxiliary FT400 Auxiliary
- Add to cart
-
16-WAY CPC CONNECTOR KIT
- $99.00
- Whether you're building your own harness or modifying an existing one, this CPC connector kit will make it easy for you to pass wires through your firewall
- Add to cart
-
2200CC INJECTORS
- $150.00 – $590.00
- 2200 cc injectors with adapter top hats, please specify which adapters you need. International Shipping Note: If you are ordering from outside of the United States, please remember to add the "international shipping" item to your cart from the products section.
- Select options
-
24-WAY CPC CONNECTOR KIT
- $119.00
- Whether you're building your own harness or modifying an existing one, this CPC connector kit will make it easy for you to pass wires through your firewall
- Add to cart
-
24-WAY MAIN CONNECTOR KIT
- $11.00
- This connector kit is compatible with the following products: FT500LITE/500 Main FT400 Main FT350 FT300 FT250 GearController BoostController2 PRO24 Datalogger
- Add to cart
-
37-WAY CPC CONNECTOR KIT
- $149.00
- Whether you're building your own harness or modifying an existing one, this CPC connector kit will make it easy for you to pass wires through your firewall.
- Add to cart
-
4 BAR HONDA MAP SENSOR (B,D,F,H SERIES)
- $95.95
- Honda factory location replacement 4 bar map sensor. Comes with new o ring. International Shipping Note: If you are ordering from outside of the United States, please remember to add the "international shipping" item to your cart from the products section.
- Add to cart
-
4 BAR HONDA MAP SENSOR FOR K-SERIES
- $95.95
- Honda K-Series factory location replacement 4 bar map sensor. International Shipping Note: If you are ordering from outside of the United States, please remember to add the "international shipping" item to your cart from the products section.
- Add to cart
-
4 PORT BOOST SOLENOID
- $125.00
- Compatable with most engine managements and aftermarket electronic controllers. Works with Hondata Aem products Holley Products Mega Squirt and many more
- Add to cart
-
- Sale!
4 SPEED B-SERIES DOG BOX FOR HONDA
-
$8,079.00Original price was: $8,079.00.$7,599.00Current price is: $7,599.00. - Select options
-
- Sale!
4 SPEED K-SERIES DOG BOX FOR HONDA
- $4,999.00 – $7,499.00
- Select options
-
4X WB-O2 NANO HARNESS
- $179.00
- Install 4 Nanos with ease!
- Select options
-
6-Cyl Direct Port Nitrous System, EFI, Gasoline (150-375Hp)
- $1,054.13 – $1,964.01
- Select options
-
6-Cyl Dry Direct Port Nitrous System
- $1,173.50 – $1,982.38
- Select options
-
70 AMP H/D FUEL PUMP HOTWIRE UNIVERSAL
- $125.00
- Stand-alone fuel pump relay system uses a sealed 70 amp heavy-duty relay. System is designed to tie directly into the battery lugs, and is furnished with a 40 amp sealed fuse holder and 10 gage wiring. Can be used stand-alone with an external toggle switch to energize the relay, or can tie into the G body fuel system wiring with…
- Add to cart
-
70 AMP H/D FUEL PUMP HOTWIRE UNIVERSAL
- $125.00
- Fuel Pump Relay Kit H/D Hotwire Universal Stand-alone fuel pump relay system uses a sealed 70 amp heavy-duty relay. System is designed to tie directly into the battery lugs, and is furnished with a 40 amp sealed fuse holder and 10 gage wiring. Can be used stand-alone with an external toggle switch to energize the relay, or can tie into…
- Add to cart
-
8-Cyl Direct Port Nitrous System, EFI, Gasoline (200-500Hp)
- $1,244.21 – $2,138.74
- Select options
-
8-Cyl Dry Direct Port Nitrous System
- $1,157.78 – $1,966.64
- Select options
-
90 DEGREE INJECTOR BOOT
- $3.00
- Add these injector boots to your custom harness to protect the wiring and for a clean installation. *Injector connector not included.
- Add to cart
-
92-01 1.6L SOHC D SERIES CLUTCH MASTERS 725 SERIES TWIN DISK
- $1,600.00
- Twin Disc. 7.25 in. (Race). Aluminum flywheel included. If your ordering outside of USA you will need to add item international shipping to your order. One per order.
- Add to cart
-
ACCORD COUPE 94-97
- $130.00 – $815.00
- Select options
-
ACT HD/RACE RIGID 6 PAD 03-05 DODGE NEON SRT-4
- $855.00
- DN4-HDR6 kit features ACT's most popular Heavy Duty pressure plate. ACT Heavy Duty pressure plates use exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's 6-pad rigid race discs are made with high…
- Add to cart
-
ACT HD/RACE RIGID 6 PAD 06-09 DODGE CALIBER SRT-4
- $955.00
- DC2-HDR6 kit features ACT's most popular Heavy Duty pressure plate. ACT Heavy Duty pressure plates use exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's 6-pad rigid race discs are made with high…
- Add to cart
-
ACT HD/RACE SPRUNG 6 PAD 06-09 DODGE CALIBER SRT-4
- $930.00
- DC2-HDG6 kit features ACT's most popular Heavy Duty pressure plate. ACT Heavy Duty pressure plates use exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's 6-pad, spring-centered race disc features a spring-center to…
- Add to cart
-
ACT HD/RACE SPRUNG 6 PAD CLUTCH KIT 03-05 DODGE NEON SRT-4
- $835.00
- When your engine puts out performance, you need a Clutch Kit that can handle it properly. All ACT Clutch Kits provide a generous increase in clamp load which directly increases torque capacity. ACT Clutch kits are offered in a number of configurations and there is one developed specifically for your vehicle. All ACT Clutch Kits include your choice of Pressure…
- Add to cart
-
ACT XT/RACE PAD CLUTCH KIT 03-05 DODGE NEON SRT-4
- $865.00
- When your engine puts out performance, you need a Clutch Kit that can handle it properly. All ACT Clutch Kits provide a generous increase in clamp load which directly increases torque capacity. ACT Clutch kits are offered in a number of configurations and there is one developed specifically for your vehicle. All ACT Clutch Kits include your choice of Pressure…
- Add to cart
-
ACURA NSX 3.0/3.2L 1990-2005, ARP2000, 12PT
- $315.00
- Acura NSX 3.0/3.2L 1990-2005, ARP2000, 12pt
- Add to cart
-
ACURA RSX 02-06
- $90.00 – $770.00
- Select options
-
AEM DIGITAL BOOST GAUGE (-30 TO 60 PSI)
- $300.00
- AEM’s 30-0308 X-Series -30in/Hg~60PSI / -1~4BAR Digital Boost Display gauge combines incredible looks, increased readability and a multitude of new, easy-to-use features! It is a must for users who want highly accurate boost pressure readouts up to 60 PSI or 4 BAR in their high performance vehicle.
- Add to cart
-
AEM X-SERIES OIL PRESSURE GAUGE (0-100PSI)
- $214.00
- AEM’s 30-0301 X-Series 100 PSI/7 BAR Digital Oil/Fuel Pressure gauge combines incredible looks, increased readability and a multitude of new, easy-to-use features! It is a must for users who want highly accurate oil or fuel pressure readouts in their high performance vehicle.
- Add to cart
-
AEM X-SERIES OIL PRESSURE GAUGE (0-150PSI)
- $261.00
- AEM’s 30-0307 X-Series 150 PSI/10 BAR Digital Oil Pressure gauge combines incredible looks, increased readability and a multitude of new, easy-to-use features! It is a must for users who want highly accurate oil or fuel pressure readouts in their high performance vehicle.
- Add to cart
-
AEM X-SERIES UEGO WIDEBAND KIT
- $212.00
- This AEM X-series Wideband UEGO Air Fuel Sensor Controller Gauge is mainly designed to gauge or sensor the current fuel ratio for certain vehicle models, giving a precise estimate for peace of mind. Its AF Ratio is 30-0300 and it measures 2 1/16th inches in diameter and comes in a striking black. Read and report values correctly and enjoy the…
- Add to cart
-
AEM X-SERIES WATER TEMP GAUGE
- $226.00
- AEM’s 30-0302 X-Series 100-300 F/40-150C Digital Gauge combine incredible looks, increased readability and a multitude of new, easy-to-use features! It is a must for users who want highly accurate water, transmission and/or oil or temperature readouts in their high performance vehicle.
- Add to cart
-
AIR / LIQUID THERMOCOUPLE
- $99.00
- The new FuelTech Air/Liquid Thermocouple offers accurate temperature reading for oil, coolant and intake air
- Add to cart
-
AIR TEMPERATURE SENSOR
- $25.00 – $32.00
- GM style intake air temperature sensor. Standard IAT sensor for all FuelTech ECUs. Thread size: 3/8" NPT
- Select options
-
ALCOHOL O2 – DUAL CHANNEL HARNESS
- $149.00
- Alcohol O2 - Dual Channel harness
- Add to cart
-
ALCOHOL O2 – DUAL CHANNEL LAB GRADE O2 CONDITIONER
- $999.00 – $1,827.00
- For use with the lab grade NTK sensors. If you do not have that specific sensor then check out our WB-O2 Nano. CAN communication with all power FT series ECUs. Features 0-5v analog outputs for connection with FT600/FT550/FT500/FT450 and other data acuistion equipment. NTK sensor requires free air calibration for proper reading.
- Select options
-
AWD Driveshaft Carrier Bearing Mount Kit
- $249.95 – $498.95
- Select options
-
Awd Honda Kit
- $4,197.95 – $4,295.95
- Select options
-
- Sale!
B SERIES – AWD DOG BOX GEAR KIT
-
$11,899.00Original price was: $11,899.00.$11,299.00Current price is: $11,299.00. - Select options
-
B SERIES HYDRAULIC THROW OUT BEARING
- $299.00
- Now available! Honda / Acura - B-Series Hydraulic Bearing Clutch Masters is proud to introduce our new Internal Hydraulic Bearing for the Honda / Acura B-Series transmissions. We have finally meet the demand from many customers who have request this style bearing which eliminates the OEM clutch fork and release bearing as well as the OEM slave cylinder. The Clutch…
- Add to cart
-
BACKPRESSURE DAMPENING CANISTER
- $179.00 – $308.00
- The FuelTech Backpressure Dampening Canister is a great addition to any turbocharged engine.
- Select options
-
BBC CAM SYNC MOUNTING BRACKET & MAGNET KIT
- $150.00
- Made for BBC 1" Raised Cam with a belt drive. Must use with Hall Effect Cam Sync Sensor. *Modification may be required to fit your application.
- Add to cart
-
BoomSlang FuelTech Harness for Acura
- $765.00 – $1,148.00
- Select options
-
BoomSlang FuelTech Harness for Honda
- $756.00 – $1,148.00
- Select options
-
BOOST BOX HARNESS (KINNETTIC KREATIONS)
- $75.00
- About as close as you can get to plug-and-play, our boost box harness makes installing N2MB boost boxes a snap without having to splice into any wires under the hood. Just plug into MAP sensor, TIP sensor, swap wires into connector for wastegate solenoid, install resistor into existing wastegate solenoid pins and heat shrink.
- Add to cart
-
BOOST CONTROLLER DUAL INJECTOR BLOCK
- $125.00
- Use with FT600 / FT550 / FT500 / FT500LITE / FT450 integrated boost controller. Pressure Input: 1/8" NPT Output to Wastegate: 1/8" NPT Recommended injectors (not included): High impedance Bosch 1700 cc/min (165 lb/hr) High impedance Bosch 2200 cc/min (210 lb/hr) Wastegate pressure sensor (PS-150) is also needed for FT500/FT600 integrated boost controller.
- Add to cart
-
BOOST CONTROLLER DUAL VALVE KIT
- $199.00
- Use with FT450 / FT500LITE / FT500 / FT550 / FT550LITE / FT600 integrated boost controller. Pressure Input: 1/8" NPT Output to Wastegate: 1/8" NPT Fittings made to accept 1/4" hose Wastegate pressure sensor (PS-150) is also needed for FT450/500LITE/500/550/600 integrated boost controller.
- Add to cart
-
BOOSTCONTROLLER2 SOLENOID VALVE
- $65.00
- Replacement solenoid valve for BoostController2. *BoostController2 requires (2) valves for operation.
- Add to cart
-
BRENT’S H22 FULL BUILD KIT (WITH TUNE)
- $8,800.00
- This is going to be a parts kit, Will need assembly and fittiment, Tune will need adjustment for your elevation.
- Add to cart
-
BURTON RACING B SERIES COIL ON PLUG CONVERSION KIT
- $429.00
- Burton Racing COP Kit Includes: COP board and Harness Set of 4 k20 Coils
- Add to cart
-
CAN B CONNECTOR KIT
- $6.00
- CAN B Connector Kit for FT550/600.
- Select options
-
CDI RACING IGNITION COIL
- $59.00 – $68.00
- Select options
-
CDI RACING IGNITION COIL BRACKET KIT
- $129.00
- Bracket kit designed to mount (4) FuelTech CDI Racing Ignition Coils Made from lightweight billet aluminum, only 13.1 oz Includes (4) 1/4” socket head cap screws to mount the coils to the bracket (4) 1/4” threads in the back, front, and bottom for mounting to the chassis
- Add to cart
-
CHT – CYLINDER HEAD TEMPERATURE THERMOCOUPLE
- $59.00
- The FuelTech Cylinder Head Temperature Thermocouple offers faster and more accurate temperature reading for engine head temperature.
- Add to cart
-
CIVIC 4 DOOR EG 92-95
- $170.00 – $830.00
- Select options
-
CIVIC 4 DOOR EK 96-00
- $170.00 – $830.00
- Select options
-
CIVIC COUPE 8TH GEN 06-11
- $110.00 – $880.00
- Select options
-
CIVIC COUPE EG 92-95
- $190.00 – $840.00
- Select options
-
CIVIC COUPE EK 96-00
- $140.00 – $820.00
- Select options
-
CIVIC EK DASH CENTER CONSOLE BLOCK OFF
- $25.00 – $55.00
- Select options
-
CIVIC HATCH EF 88-89
- $190.00 – $800.00
- Select options
-
CIVIC HATCH EF 90-91
- $180.00 – $800.00
- Select options
-
CIVIC HATCH EG 92-95
- $190.00 – $850.00
- Select options
-
CIVIC HATCH EK 96-00
- $150.00 – $800.00
- Select options
-
CIVIC HATCH/COUPE EG 92-95 WINDSHIELD
- $215.00 – $410.00
- Select options
-
CIVIC HATCH/COUPE EK 96-00 WINDSHIELD
- $215.00 – $450.00
- Select options
-
CLUTCH MASTER FX300 02-06 K SERIES
- $523.95
- High rev pressure plate. Sprung hub segmented Kevlar disc. All orders out of the USA must add item International Shipping. One Per Order
- Add to cart
-
CLUTCH MASTERS 725 SERIES TWIN DISK SRT-4
- $1,600.00
- Twin Disc. 7.25 in. (Race). Aluminum flywheel included. If your ordering out of the USA you will need to add item international shipping to your cart, one per order.
- Add to cart
-
CLUTCH MASTERS FX100 02-06 K SERIES
- $467.25
- High rev pressure plate. Sprung hub steel-backed organic lined disc. All orders out of the USA must add item International Shipping. One Per Order
- Add to cart
-
CLUTCH MASTERS FX100 92-01 1.6L SOHC D SERIES
- $435.75
- Heavy duty pressure plate. Sprung hub steel-backed organic lined disc. All out of USA orders must add item International Shipping. One per order.
- Add to cart
-
CLUTCH MASTERS FX100 94-01 1.6L DOHC B SERIES
- $467.25
- High rev pressure plate. Sprung hub steel-backed organic lined disc. All out of USA orders must add item International Shipping. One Per Order.
- Add to cart
-
CLUTCH MASTERS FX200 02-06 K SERIES
- $523.95
- High rev pressure plate. Sprung hub full-face Kevlar lined disc. All orders out of the USA must add item International Shipping. One Per Order
- Add to cart
-
CLUTCH MASTERS FX200 92-01 1.6L SOHC D SERIES
- $493.50
- Heavy duty pressure plate. Sprung hub full-face Kevlar lined disc. All out of USA orders must add item International Shipping. One per order.
- Add to cart
-
CLUTCH MASTERS FX200 94-01 1.6L DOHC B SERIES
- $523.95
- High rev pressure plate. Sprung hub full-face Kevlar lined disc. All out of USA orders must add item International Shipping. One Per Order.
- Add to cart
-
CLUTCH MASTERS FX250 02-06 K SERIES
- $483.00
- High rev pressure plate. Sprung hub dual friction Organic/Fiber Tough disc. All orders out of the USA must add item International Shipping. One Per Order.
- Add to cart
-
CLUTCH MASTERS FX250 92-01 1.6L SOHC D SERIES
- $446.25
- Heavy duty pressure plate. Sprung hub dual friction Organic/Fiber Tough disc. All out of USA orders must add item International Shipping. One per order.
- Add to cart
-
CLUTCH MASTERS FX250 94-01 1.6L DOHC B SERIES
- $483.00
- High rev pressure plate. Sprung hub dual friction Organic/Fiber Tough disc. All out of USA orders must add item International Shipping. One Per Order
- Add to cart
-
CLUTCH MASTERS FX300 92-01 1.6L SOHC D SERIES
- $493.50
- Heavy duty pressure plate. Sprung hub segmented Kevlar disc. All out of USA orders must add item International Shipping. One Per Order.
- Add to cart
-
CLUTCH MASTERS FX300 94-01 1.6L DOHC B SERIES
- $523.95
- High rev pressure plate. Sprung hub segmented Kevlar disc. All out of USA orders must add item International Shipping. One Per Order
- Add to cart
-
CLUTCH MASTERS FX350 02-06 K SERIES
- $509.25
- High rev pressure plate. Sprung hub Fiber Friction lined disc. All orders out of USA must add item International Shipping. One Per Order
- Add to cart
-
CLUTCH MASTERS FX350 92-01 1.6L SOHC D SERIES
- $467.25
- Heavy duty pressure plate. Sprung hub Fiber Friction lined disc. All out of USA orders must add item International Shipping. One per order.
- Add to cart
-
CLUTCH MASTERS FX350 94-01 1.6L DOHC B SERIES
- $509.25
- High rev pressure plate. Sprung hub Fiber Friction lined disc. All out of USA orders must add item International Shipping. One Per Order.
- Add to cart
-
CLUTCH MASTERS FX400 02-06 K SERIES
- $509.25
- High rev pressure plate. 6-puck ceramic sprung disc. All orders out of the USA must add item International Shipping. One Per Order
- Add to cart
-
CLUTCH MASTERS FX400 92-01 1.6L SOHC D SERIES
- $467.25
- Heavy duty pressure plate. 6-puck ceramic sprung disc All out of USA orders must add item International Shipping. One Per Order.
- Add to cart
-
CLUTCH MASTERS FX400 94-01 1.6L DOHC B SERIES
- $509.25
- High rev pressure plate. 6-puck ceramic sprung disc. All out of USA orders must add item International Shipping. One Per Order
- Add to cart
-
CLUTCH MASTERS FX500 02-06 K SERIES
- $472.50
- High rev pressure plate. 6-puck rigid ceramic disc. All Orders out of the USA must add item International Shipping. One Per Order.
- Add to cart
-
CLUTCH MASTERS FX500 92-01 1.6L SOHC D SERIES
- $435.75
- Heavy duty pressure plate. 6-puck rigid ceramic disc. All out of USA orders must add item International Shipping. One Per Order.
- Add to cart
-
CLUTCH MASTERS FX500 94-01 1.6L DOHC B SERIES
- $472.50
- High rev pressure plate. 6-puck rigid ceramic disc. All out of USA orders must add item International Shipping. One Per Order
- Add to cart
-
CLUTCH MASTERS K SERIES HYDRAULIC THROW OUT BEARING
- $299.00
- Clutch Masters High Performance Hydraulic Bearing Unit includes the following: Aluminum Housing and Piston High Speed Roller Bearing Steel Braided lines
- Add to cart
-
CLUTCH MASTERS TRIPLE DISK 02-06 K SERIES
- $1,800.00
- Custom Triple Disc. 7.25 in. (Race). Steel flywheel included. All out of USA orders must add item International Shipping. One Per Order.
- Add to cart
-
CLUTCH MASTERS TRIPLE DISK 94-01 1.6L DOHC B SERIES
- $1,800.00
- Custom Triple Disc. 7.25 in. (Race). Steel flywheel included. All out of USA orders must add item International Shipping. One Per Order.
- Add to cart
-
CLUTCH MASTERS TWIN DISK (RACE) 02-06 K SERIES
- $1,600.00
- Twin Disc. 7.25 in. (Race). Steel flywheel included. All out of USA orders must add item International Shipping. One Per Order
- Add to cart
-
CLUTCH MASTERS TWIN DISK (RACE) 94-01 1.6L DOHC B SERIES
- $1,600.00
- Twin Disc. 7.25 in. (Race). Steel flywheel included. All out of USA orders must add item International Shipping. One Per Order.
- Add to cart
-
CLUTCH MASTERS TWIN DISK (RACE/STREET) 02-06 K SERIES
- $1,600.00
- Twin Disc. 7.25 in. (Race/Street). Steel flywheel included. All out of USA orders must add item International Shipping. One Per Order.
- Add to cart
-
CLUTCH MASTERS TWIN DISK (RACE/STREET) 94-01 1.6L DOHC B SERIES
- $1,600.00
- Twin Disc. 7.25 in. (Race/Street). Steel flywheel included. All out of USA orders must add item International shipping. One Per Order.
- Add to cart
-
CRX 88-89
- $35.00 – $880.00
- Select options
-
CRX 90-91
- $35.00 – $880.00
- Select options
-
CRX WINDSHIELD
- $215.00 – $410.00
- Select options
-
DASHBOARD ECU INSERT PANEL (FT350/400/500)
- $89.00
- Perfect mounting solution for your FT350/FT400/FT500 ECU. Modifications are required to fit specific vehicle. Approximate Dimensions: 18" x 12"
- Add to cart
-
- Out of Stock
DASHBOARD ECU INSERT PANEL (FT450/550)
- $89.00
- Perfect mounting solution for your FT450 & FT550 ECU.
- Read more
-
-
DASHBOARD ECU INSERT PANEL (FT600)
- $89.00
- Perfect mounting solution for your FT600 ECU
- Add to cart
-
DAVIS 32T DRIVESHAFT SPLIT COLLAR
- $175.00
- Davis Technologies 32 tooth split collars are the only collars on the market with 32 triggers, providing unparalleled resolution, speed and accuracy.
- Select options
-
DAVIS DRIVESHAFT SENSOR
- $175.00 – $350.00
- Davis Technologies sensors are extremely high quality Hall Effect type, capable of measuring speeds up to 15 KHz.
- Select options
-
Del Sol
- $60.00 – $625.00
- Select options
-
DODGE 2.4L, SRT4 & PT CRUISER, ’03 & UP KIT
- $189.00
- Dodge 2.4L, SRT4 & PT Cruiser, '03 & up Kit
- Add to cart
-
DRIVESHAFT SENSOR W/ BRACKET
- $159.00 – $269.00
- Compatible with the following ECUs: FT600 / FT550 / FT500 / FT500LITE / FT450 Available in 5/16" and 3/8" diameters. *Must be used with a magnetic collar.
- Select options
-
Dry Direct Port Nitrous System, 4 Cylinder
- $685.13 – $913.72
- Select options
-
EGT THREAD IN 1/8″ NPT BUNG
- $11.00
- Screw in bung 1/8 NPT thread for 1/4 inches thermocoupler installation.
- Add to cart
-
EGT-4 CAN
- $359.00 – $1,390.00
- 4 channel conditioner for Type K thermocouples with CAN communication for PowerFT ECU's.
- Select options
-
ELECTRONIC WASTEGATE
- $979.95 – $1,439.00
- Select options
-
EV1 INJECTOR CONNECTOR KIT
- $7.00
- Use this kit when building a custom harness while using injectors with EV1 connectors and protect wiring for a clean installation. Kit Includes: EV1 injector connector, (2) terminals, and a 90 degree boot.
- Add to cart
-
EV6/EV14 INJECTOR CONNECTOR KIT
- $7.00
- Use this kit when building a custom harness while using injectors with EV6/EV14 connectors. Kit Includes: EV6/EV14 injector connector, (2) terminals, (2) seals. *To be used with Injector Dynamics injectors
- Add to cart
-
EXTERNAL MAP SENSOR, 10 BAR
- $169.00 – $175.00
- This sensor is needed if you are exceeding the limit of your internal map sensor on your ECU or want to run an external map sensor on your setup
- Select options
-
Featherlight Series V3 Rear Trailing Arm Kit
- $2,189.95 – $2,269.95
- Select options
-
FLEX FUEL SENSOR
- $119.00 – $130.00
- The FuelTech Flex Fuel sensor is the way in which to monitor and vary the ignition timing, fuel injection and boost level based off the ethanol content in the engine’s fuel
- Select options
-
FT Injector
- $375.00 – $425.00
- The FT Injector is compatible with any ECU available on the market and an 8A/2A Peak and Hold injector driver required.
- Select options
-
FT INPUT EXPANDER
- $549.00 – $738.00
- Input Expander Module for PowerFT line
- Select options
-
FT250/300/350/400 DYNO EXTENSION – MAIN HARNESS
- $109.00
- Used to extend main harness on dynamometers.
- Add to cart
-
FT250/300/350/400 UNTERMINATED MAIN HARNESS
- $69.00 – $99.00
- FT200, FT250, FT300, FT350 and FT400 main harness
- Select options
-
FT350 TO FT450 ADAPTER HARNESS
- $75.00
- FT350 to FT450 Adapter Harness
- Add to cart
-
FT350 TO FT450 ADAPTER HARNESS W/ NANO
- $109.00
- FT350 to FT450 adapter harness
- Add to cart
-
FT400 DYNO EXTENSION – AUXILIARY HARNESS
- $79.00
- FT400 dyno extension auxiliary harness
- Add to cart
-
FT400 TO FT550 ADAPTER HARNESS
- $149.00
- FT400 to FT550 adapter harness
- Add to cart
-
FT400 UNTERMINATED AUXILIARY HARNESS
- $59.00 – $69.00
- FT400 unterminated auxiliary harness
- Select options
-
FT400 UNTERMINATED REDUCED AUXILIARY HARNESS
- $39.00
- FT400 reduced auxiliary harness. Used on cars that do not need any other functions from the auxiliary harness.
- Add to cart
-
FT450 CONNECTOR KIT
- $79.00
- The FT450 Connector Kit is recommended for those who have upgraded to the FT450 ECU and want to modify their existing harness for the new FT450 connector.
- Add to cart
-
FT450 EFI SYSTEM
- $999.00 – $1,698.00
- ECU electronic injection system in automotive vehicles. The FT450 is a FuelTech engine monitoring and control system: electronic injection, integrated instrument panel, data acquisition and power management.
- Select options
-
FT450/550 4 CYLINDER UNIVERSAL A HARNESS
- $599.00
- The FuelTech Universal 4 cylinder A harness is a great addition to any 4 cylinder build and can be used with both the FT450 and FT550 ECU’s in a complete plug and play style.
- Add to cart
-
FT450/550 A UNTERMINATED HARNESS
- $99.00 – $139.00
- Unterminated harness for FT450/550 A connector.
- Select options
-
FT450/550/600 TERMINAL
- $1.00
- Fits FT450/550/600 ECU mating connectors
- Add to cart
-
FT500 DYNO EXTENSION HARNESS
- $159.00
- Used on dynamometers to extend existing FT500 harness.
- Add to cart
-
FT500 TO FT550 ADAPTER HARNESS
- $149.00 – $159.00
- FT500 to FT550 adapter harness
- Select options
-
FT500 TO FT600 ADAPTER HARNESS
- $199.00 – $219.00
- Select options
-
FT500 UNTERMINATED HARNESS
- $129.00 – $169.00
- FT500 Unterminated Harness
- Select options
-
FT550 4 CYLINDER UNIVERSAL B EXPANSION HARNESS
- $259.00 – $858.00
- The FuelTech Universal 4 cylinder B FT550 expansion harness compliments the Universal 4 cylinder A harness with the options to control up to 8 injectors staged sequentially, have direct connection for inbuilt gear controller as well as the additions to inputs and outputs.
- Select options
-
FT550 CONNECTOR KIT
- $119.00
- The FT550 Connector Kit is recommended for those who have upgraded to the FT550 ECU and want to modify their existing harness for the new FT550 connectors
- Add to cart
-
FT550 EFI SYSTEM
- $1,699.00 – $2,698.00
- ECU electronic injection system in automotive vehicles. The FT550 is an engine fuel control and monitoring system from FuelTech: electronic fuel injection, integrated dashboard, data acquisition and power management.
- Select options
-
FT550 UNTERMINATED HARNESS
- $99.00 – $258.00
- Unterminated harness for FT550
- Select options
-
FT550LITE EFI SYSTEM
- $1,349.00 – $2,248.00
- Enjoy all of the same features of the FT550 ECU at a reduced cost. The FT550LITE is an engine fuel control and monitoring system from FuelTech: electronic fuel injection, data acquisition and power management. *The FT550LITE ECU does not include an LCD touchscreen display.
- Select options
-
FT600 CONNECTOR KIT
- $139.00
- The FT600 Connector Kit is recommended for those who have upgraded to the FT600 ECU and want to modify their existing harness for the new FT600 connectors.
- Add to cart
-
FT600 EFI SYSTEM
- $2,499.00 – $4,198.00
- A FT600 is FuelTech’s most advanced engine control and monitoring system. It is an ECU, dashboard, data acquisition and power management system!
- Select options
-
- Out of Stock
FT600 STEERING COLUMN MOUNTING BRACKET
- $225.00
- Read more
-
-
FT600 UNTERMINATED HARNESS
- $279.00 – $339.00
- FT600 unterminated harness.
- Select options
-
FTSPARK BILLET MOUNTING BRACKET
- $225.00
- Simplify installation of your FTSPARK with our chassis mounting bracket. Available sizes: 1.375", 1.500" and 1.625"
- Select options
-
FTSPARK CONNECTOR KIT
- $54.00
- The FTSPARK Connector Kit is recommended for those who want to build their own custom FTSPARK harness. Kit includes: (1) FTSPARK Connector (40) FTSPARK Terminals *Must use twisted wires with insulation rated to a minimum of 500V on coil leads.
- Add to cart
-
FTSPARK EXTREME – 1500MJ
- $1,999.00 – $4,217.00
- The FuelTech FTSPARK EXTREME is an extremely high energy Capacitive Discharge Ignition (CDI) system designed to meet the highest spark requirements for racing.
- Select options
-
FTSPARK EXTREME HARNESS
- $219.00
- FTSPARK EXTREME Harness
- Add to cart
-
FTSPARK-1 HARNESS
- $119.00
- FTSPARK-1 harness.
- Add to cart
-
FTSPARK-4 GEN II – 750MJ
- $1,599.00 – $1,728.00
- The FuelTech FTSPARK is an extremely high energy Capacitive Discharge Ignition (CDI) system designed to meet the highest spark requirements for racing.
- Select options
-
FTSPARK-4 HARNESS
- $129.00
- FTSPARK-4 harness.
- Add to cart
-
FTSPARK-6 GEN II – 750MJ
- $1,799.00 – $1,948.00
- The FuelTech FTSPARK is an extremely high energy Capacitive Discharge Ignition (CDI) system designed to meet the highest spark requirements for racing.
- Select options
-
FTSPARK-6 HARNESS
- $149.00
- FTSPARK-6 harness.
- Add to cart
-
FTSPARK-8 GEN II – 750MJ
- $1,999.00 – $2,498.00
- The FuelTech FTSPARK is an extremely high energy Capacitive Discharge Ignition (CDI) system designed to meet the highest spark requirements for racing.
- Select options
-
FTSPARK-8 HARNESS
- $169.00
- FTSPARK-8 harness
- Add to cart
-
FUEL PUMP COVER EG/EK
- $20.00 – $40.00
- Select options
-
- Out of Stock
FUELTECH ECU PROTECTION COVER
- $17.50
- Read more
-
-
H22
- $1,650.00 – $2,400.00
- Select options
-
HALL EFFECT RPM/SPEED SENSOR
- $89.00 – $98.00
- Can be used to read engine RPM or crank triggers. Can also be used to read wheel speed, gearbox speed, etc. with proper trigger wheel.
- Select options
-
HONDA 1.5L (L15) SOHC 16V KIT
- $219.00
- Honda 1.5L (L15) SOHC 16V Kit
- Add to cart
-
- Out of Stock
Honda 4 Cyl B16A Vtec 2156cc Bare Aluminum Cylinder Head
- $783.80
- Read more
-
-
- Out of Stock
Honda 4Cyl B16A Vtec Full CNC Aluminum Bare Cylinder Head
- $1,245.80
- Read more
-
-
- Sale!
Honda B Series AWD
- $1,550.00 – $2,350.00
- This is a Pre-Order Sale Only! Once all available pre-orders have been made the product will then ship. THIS PRODUCT WILL NOT SHIP UNTIL ALL AVAILABLE SALE STOCK HAS BEEN PURCHASED. All Pre-Sale purchases will come with a complimentary KDN Shirt
- Select options
-
HONDA B20B, WITH B16A HEAD KIT
- $189.00
- Honda B20B, with B16A head Kit
- Add to cart
-
HONDA D16A & D16Z M10 HEAD STUD KIT
- $168.00
- Honda D16A & D16Z M10 Kit #: 208-4301
- Add to cart
-
HONDA D16Y KIT
- $165.00
- Honda D16Y Kit
- Add to cart
-
HONDA F20 S2000 KIT
- $195.00
- Honda F20 S2000 Kit
- Add to cart
-
HONDA H22 A4 VTEC KIT
- $219.00
- Honda H22 A4 VTEC Kit
- Add to cart
-
HONDA H23A KIT
- $215.00
- Honda H23A Kit
- Add to cart
-
HONDA/ACURA B16A
- $189.00
- Honda/Acura B16A
- Add to cart
-
HONDA/ACURA B16A KIT
- $189.00
- Honda/Acura B16A Kit
- Add to cart
-
HONDA/ACURA B18A1 12PT
- $189.00
- Honda/Acura B18A1 12pt
- Add to cart
-
HONDA/ACURA B18A1 12PT HEAD STUD KIT
- $189.00
- Honda/Acura B18A1 12pt Head Stud Kit
- Add to cart
-
HONDA/ACURA B18C1 VTEC 12PT
- $179.00
- Honda/Acura B18C1 VTEC 12pt
- Add to cart
-
HONDA/ACURA B18C1 VTEC 12PT KIT
- $189.00
- Honda/Acura B18C1 VTEC 12pt Kit #: 208-4303
- Add to cart
-
HONDA/ACURA K20A (A2 & A3)
- $189.00
- Honda/Acura K20A (A2 & A3)
- Add to cart
-
HONDA/ACURA K20A (A2 & A3) KIT
- $189.00
- Honda/Acura K20A (A2 & A3) Kit
- Add to cart
-
- Out of Stock
HONDATA S300 V3
- $495.00 – $960.00
- The s300 version 3 is a plug in module to the OBD1 factory Honda Engine Computer (not included) which vastly expands the capabilities of the factory ECU. Forced induction, datalogging, real time programming, Bluetooth and engine protection are but a few of the comprehensive s300 features. the $495 is for the Hondata board and cable itself for an obd1 ecu…
- Select options
-
-
Hot Rodding is Not A Crime Shirt
- $33.00
- White Men's T-Shirt, all sizes are U.S. Men's PFI Logo on the sleeve Front Shirt Design in Black - Hot Rodding is Not A Crime
- Select options
-
IGN1A INDUCTIVE SMART COIL
- $79.00 – $88.00
- Select options
-
Injector Dynamics
- $141.75 – $367.50
- Select options
-
INTEGRA DA 90-93
- $120.00 – $830.00
- Select options
-
INTEGRA DA 90-93 WINDSHIED
- $215.00 – $410.00
- Select options
-
INTEGRA DC 94-01
- $110.00 – $815.00
- Select options
-
INTEGRA DC 94-01 WINDSHIELD
- $215.00 – $410.00
- Select options
-
JE PROSEAL HONDA B SERIES VTEC 81.5MM
- $149.96
- MLS b series btec 81.5mm bore
- Add to cart
-
JE PROSEAL HONDA B SERIES VTEC 82MM
- $149.96
- MLS B series btec 82mm headgasket
- Add to cart
-
JE PROSEAL HONDA B SERIES VTEC 83MM
- $149.96
- MLS B series vtec 83mm
- Add to cart
-
JE PROSEAL HONDA B SERIES VTEC 84MM
- $149.96
- MLS b series vtec 84mm
- Add to cart
-
JE PROSEAL HONDA B SERIES VTEC 85MM
- $149.96
- Mls Honda B Series Vtec 85mm
- Add to cart
-
JE PROSEAL HONDA B18A NON VTEC 81MM
- $149.96
- MLS Honda B18A non Vtec 81mm
- Add to cart
-
JE PROSEAL HONDA B18A NON VTEC 82MM
- $149.96
- MLS Honda B18A non Vtec 82mm
- Add to cart
-
JE PROSEAL HONDA B18A NON VTEC 83MM
- $149.96
- MLS Honda B18A non Vtec 83mm
- Add to cart
-
JE PROSEAL HONDA B18A NON VTEC 84MM
- $149.96
- MLS Honda B18A non Vtec 84mm
- Add to cart
-
JE PROSEAL HONDA B18A NON VTEC 85MM
- $149.96
- MLS Honda B18A non Vtec 85mm
- Add to cart
-
JE PROSEAL HONDA B18A W/VTEC HEAD 81MM
- $149.96
- MLS Honda B18A w/Vtec Head 81mm
- Add to cart
-
JE PROSEAL HONDA B18A W/VTEC HEAD 82MM
- $149.96
- MLS Honda B18A w/Vtec Head 82mm
- Add to cart
-
JE PROSEAL HONDA B18A W/VTEC HEAD 83MM
- $149.96
- MLS Honda B18A w/Vtec Head 83mm
- Add to cart
-
JE PROSEAL HONDA B18A W/VTEC HEAD 84MM
- $149.96
- MLS Honda B18A w/Vtec Head 84mm
- Add to cart
-
JE PROSEAL HONDA B18A W/VTEC HEAD 85MM
- $149.96
- MLS Honda B18A w/Vtec Head 85mm
- Add to cart
-
JE PROSEAL HONDA B20B4 / B20Z2 85MM
- $149.96
- MLS Honda B20B4 / B20Z2 85mm
- Add to cart
-
JE PROSEAL HONDA D13B / D15B / D16A6-A7 / D16Z1-Z2 76MM
- $149.96
- MLS Honda D13B / D15B / D16A6-A7 / D16Z1-Z2 76mm
- Add to cart
-
JE PROSEAL HONDA D13B / D15B / D16A6-A7 / D16Z1-Z2 77MM
- $149.96
- MLS Honda D13B / D15B / D16A6-A7 / D16Z1-Z2 77mm
- Add to cart
-
JE PROSEAL HONDA D13B / D15B / D16A6-A7 / D16Z1-Z2 78MM
- $149.96
- MLS Honda D13B / D15B / D16A6-A7 / D16Z1-Z2 78mm
- Add to cart
-
JE PROSEAL HONDA D13B / D15B / D16A6-A7 / D16Z1-Z2 79MM
- $149.96
- MLS Honda D13B / D15B / D16A6-A7 / D16Z1-Z2 79mm
- Add to cart
-
JE PROSEAL HONDA D15Z1 / D16Y5-Y8 76MM
- $149.96
- MLS Honda D15Z1 / D16Y5-Y8 76mm
- Add to cart
-
JE PROSEAL HONDA D15Z1 / D16Y5-Y8 77MM
- $149.96
- MLS Honda D15Z1 / D16Y5-Y8 77mm
- Add to cart
-
JE PROSEAL HONDA D15Z1 / D16Y5-Y8 78MM
- $149.96
- MLS Honda D15Z1 / D16Y5-Y8 78mm
- Add to cart
-
JE PROSEAL HONDA F20C / F22C 89MM
- $149.96
- MLS Honda F20C / F22C 89mm
- Add to cart
-
JE PROSEAL HONDA K20/K24 88.5MM
- $149.96
- MLS Honda K20/K24 88.5mm
- Add to cart
-
- Sale!
K SERIES – AWD DOG BOX GEAR KIT
-
$11,899.00Original price was: $11,899.00.$11,299.00Current price is: $11,299.00. - Select options
-
K Series Swap
- $1,650.00 – $2,350.00
- Select options
-
- Out of Stock
K-PRO
- $845.00 – $1,195.00
- The K-Series Programmable ECU (K-Pro) consists of a hardware modification to any K-Series ECU, plus Windows softwarewhich allows you to re-program the ECU and datalog sensors. This is for the K-pro chip itself, You need to specify which version you need in the options and if you need it installed you will need to provide a core or contact us to…
- Select options
-
-
- Out of Stock
LET’S GET RAD STICKER
- $5.00
- Let's Get Rad PFI Sticker Available in White, Lime Green and Purple. 3x4 Inches Vinyl Sticker
- Select options
-
-
- Sale!
Let’s Go T-Shirt
-
$33.00Original price was: $33.00.$18.00Current price is: $18.00. - PFI Let's Go T-Shirt
- Select options
-
LS550 V8 COMPLETE HARNESS
- $899.00 – $916.75
- The FuelTech LS550 V8 complete plug and play harness is the best fit for a standalone LS swap utilizing the FuelTech FT550 or FT550LITE ECU and GM LS engine.
- Select options
-
MAXX-DUTY 70 AMP SEALED RELAY KIT
- $50.00
- Universal MAXX-Relay Connector Kit Includes: 70 Amp Relay, Relay Connector, Terminals and Seals (can be used with 10 - 16 Gauged wire)
- Add to cart
-
MSD HALL EFFECT CAM SYNC SENSOR
- $87.50
- Hall Effect Cam Sync Sensor w/ LED.
- Add to cart
-
N-Tercooler Spray Ring System
- $418.96 – $1,153.42
- Select options
-
N-Tercooler Spray Ring System For Co2
- $440.42 – $1,174.88
- Select options
-
N-Tercooler System (Remote Mount Solenoid)
- $445.47 – $1,166.03
- Select options
-
N-Tercooler System For Co2 (Remote Mount Solenoid)
- $466.92 – $1,187.49
- Select options
-
N05086-A (DODGE NEON SRT4)
- $399.00
- Clutch Masters High Performance Hydraulic Bearing (To work with Clutch Masters FX725) Shim Kit Included. Unit includes the following: Aluminum Housing and Piston High Speed Roller Bearing Steel Braided lines
- Add to cart
-
NGK IRIDIUM IX BKR9EIX (2669) SOLD INDIVIDUALLY
- $18.95
- These NGK Iridium IX Spark Plugs replace OEM and aftermarket plugs 2669 BKR9EIX2669 BKR9EIX 2669 BKR9EIX and is perfect for a tune up or performance upgrade. Pfispeed uses these spark plugs in most turbo applications using aem infinity management.
- Add to cart
-
NGK R5671A-8 (4554) SOLD INDIVIDUAL
- $13.03
- These NGK V-Power Racing Spark Plugs replace OEM and aftermarket plugs 4554 R5671A-84554 R5671A8 4554 R5671A 8 and is perfect for a tune up or performance upgrade. These plugs are what pfispeed uses in most turbo honda applications.
- Add to cart
-
NIPPON DENSO INJECTOR CONNECTOR KIT
- $7.00
- Use this kit when building a custom harness while using injectors with Nippon Denso connectors. Kit Includes: Nippon Denso injector connector, (2) terminals, (2) seals.
- Add to cart
-
- Out of Stock
NON-RED DRAGON FIRE HEAVY DUTY STOCK SERIES IGNITION DISTRIBUTOR FOR HONDA/ACURA 92-95 DOHC VTEC OBD1
- $165.00
- Restore proper spark in your Honda with this complete Brand New Stock-Series Distributor Assembly. This distributor features an exact OEM factory appearance while containing electronics that exceed OEM specification, specifically designed to give racers an edge without having the appearance of an ignition upgrade under the hood or for anyone wanting a reliable distributor on their daily driver. Comes complete…
- Read more
-
-
- Out of Stock
NON-RED DRAGON FIRE HEAVY DUTY STOCK SERIES IGNITION DISTRIBUTOR FOR HONDA/ACURA 96-01 OBD2
- $165.00
- Restore proper spark in your Honda with this complete brand new stock-series distributor assembly. This distributor feature an exact OEM factory exterior appearance while containing electronics that exceed OEM specification, specially designed to give racers and edge without having the appearance of an ignition upgrade under the hood or for anyone wanting a reliable distributor on their daily driver. Comes…
- Read more
-
-
Oem AWD Trailing Arm Kit
- $1,849.95 – $2,229.95
- Select options
-
- Out of Stock
OG PFI THUMBS UP STICKER
- $5.00
- Original PFI Thumbs Up Logo Sticker *Currently only offered in White* Approximate Size: 9inches long X 1.5inches tall
- Read more
-
-
PAN VACUUM SENSOR
- $159.00 – $165.00
- Monitor crankcase vacuum inside your engine to make sure piston rings are sealing properly in the cylinders
- Select options
-
PEAK & HOLD 2A/0.5A DRIVER
- $229.00 – $254.00
- 4 channel low impedance injectors driver unit.
- Select options
-
PEAK & HOLD 4A/1A DRIVER
- $229.00 – $254.00
- 4 channel low impedance injectors driver unit.
- Select options
-
PEAK & HOLD 8A/2A DRIVER
- $229.00 – $254.00
- 4 channel low impedance injectors driver unit.
- Select options
-
PEAK & HOLD HARNESS
- $25.00
- Peak & Hold harness.
- Add to cart
-
PFI BULLY STICKER
- $3.00
- PFI Bully Sticker Designed by Capsule Racing
- Add to cart
-
PFI Class Legal 6275G Dual Ball Bearing Turbo Vband Compressor Cover Outlet
- $1,199.99 – $1,299.99
- PSR Class Legal Turbo with 62/98mm Compressor wheel Dual ceramic ball bearing system provides optimal turbo response & better durability by reducing the shaft-motion 10 Blade G-Aero billet compressor wheel with extended tapered tip technology 9 Blade G-Aero Inconel 713c turbine wheel Anti-Surge ported-shroud compressor inlet, cover integrated with the speed sensor port 6 Turbine housing in option
- Select options
-
PFI Class Legal 6775G Dual Ball Bearing Turbo Vband Compressor Cover Outlet
- $1,199.99 – $1,299.99
- PSR Class Legal Turbo with 67/98mm Compressor wheel Dual ceramic ball bearing system provides optimal turbo response & better durability by reducing the shaft-motion 10 Blade G-Aero billet compressor wheel with extended tapered tip technology 9 Blade G-Aero Inconel 713c turbine wheel Anti-Surge ported-shroud compressor inlet, cover integrated with the speed sensor port 6 Turbine housing in option
- Select options
-
- Sale!
PFI Rippin’ Rodeo T-Shirt
- $8.00 – $10.00
- Select options
-
PFI STICKER
- $5.00
- PFI Sticker Roughly 3x5 inches
- Select options
-
PRO550 V8 COMPLETE HARNESS
- $999.00 – $1,174.00
- The FuelTech PRO550 V8 plug and play harness is the best link between your FT550 or FT550LITE ECU and V8 engine.
- Select options
-
PRO550/600 & PROBIKE A 8-WAY CONNECTOR KIT
- $8.00
- This connector kit is used with the PRO550 & PRO600 V8 Complete Harness to utilize extra inputs or outputs.
- Add to cart
-
PRO550/600 & PROBIKE B 10-WAY CONNECTOR KIT
- $9.00
- This connector kit is used with the PRO550 & PRO600 V8 Complete Harness to utilize extra inputs or outputs.
- Add to cart
-
PRO550/600 12-WAY CONNECTOR KIT
- $10.00
- This connector kit is used with the PRO550 & PRO600 V8 Complete Harness to utilize extra inputs or outputs.
- Add to cart
-
PRO550/600 FTSPARK-1 HARNESS
- $399.00
- The FuelTech PRO550/600 FTSpark-1 harness is a true plug and play expansion to complement both the PRO550 and PRO600 V8 harness.
- Add to cart
-
PRO550/600 FTSPARK-8 HARNESS
- $499.00 – $575.00
- The FuelTech PRO550/600 FTSpark-8 harness is a true plug and play expansion to complement both the PRO550 and PRO600 V8 harness.
- Select options
-
PRO550/600 V8 SMART COIL HARNESS
- $469.00 – $549.00
- The FuelTech PRO550/600 Smart Coil harness is a true plug and play expansion to complement both the PRO550 and PRO600 V8 harness.
- Select options
-
PRO600 16-WAY CONNECTOR KIT
- $11.00
- This connector kit is used with the PRO600 V8 Complete Harness to utilize extra inputs.
- Add to cart
-
PRO600 GEN II V8 COMPLETE HARNESS
- $1,699.00 – $1,884.00
- The FuelTech PRO600 V8 plug and play harness is the best link between your FT600 ECU and V8 engine.
- Select options
-
PRO600 V8 SECONDARY INJECTOR HARNESS
- $399.00
- The FuelTech PRO600 Secondary Injector harness is designed as a true plug and play expansion to complement the PRO600 V8 harness.
- Add to cart
-
PROBIKE A HARNESS
- $599.00 – $606.50
- The FuelTech PROBIKE A Harness is a terminated harness to be used with a FT450 or FT550 ECU.
- Select options
-
PROBIKE B 6-WAY CONNECTOR KIT
- $8.00
- This connector kit is used with the PROBIKE B Expansion Harness to utilize extra inputs or outputs.
- Add to cart
-
PROBIKE B EXPANSION HARNESS
- $399.00 – $422.50
- FuelTech PROBIKE B Expansion Harness is a terminated expansion harness to be used with an FT550 ECU and a PROBIKE A Harness.
- Select options
-
PS-10B PRESSURE SENSOR (0-10 BAR)
- $129.00 – $135.00
- Typically used to monitor fuel, oil, and wastegate pressure
- Select options
-
PS-150 PRESSURE SENSOR (0-150 PSI)
- $129.00 – $135.00
- Typically used to monitor fuel, oil, and wastegate pressure.
- Select options
-
PS-1500 PRESSURE SENSOR (0-1500 PSI)
- $129.00 – $135.00
- Typically used to monitor nitrous bottle and brake pressure.
- Select options
-
PS-300 PRESSURE SENSOR (0-300 PSI)
- $129.00 – $135.00
- Typically used to monitor fuel, oil, and wastegate pressure.
- Select options
-
PS-3000 PRESSURE SENSOR (0-3000 PSI)
- $129.00 – $135.00
- Typically used for wheelie bar load cells.
- Select options
-
PS-500 PRESSURE SENSOR (0-500 PSI)
- $129.00 – $135.00
- Typically used to monitor transmission, converter, clutch, and mechanical fuel pressure.
- Select options
-
Pulsar PSR3584 Gen3 Dual Ball Bearing Turbocharger
- $699.99 – $1,199.99
- Dual Ceramic Ball Bearing System 10 Blade Gen2 Billet Compressor Wheel with Extended Tapered Tip Technology Inconel 713c 10 Blade Turbine Wheel with High Horsepower Cover Integrated with the Speed Sensor Port 0.83, 1.01 A/R dual v-band turbine housing, T3 0.63, 0.82 V-Band outlet, T4 0.82 V-Band outlet etc. turbine housings in option V-Band Flange kit(s) for the exhaust housing…
- Select options
-
PULSAR Turbo GTX3582R GEN2 Turbocharger
- $499.99 – $999.99
- Select options
-
PULSAR Turbo GTX3584RS GEN2 Turbocharger
- $499.99 – $999.99
- Select options
-
RACEPAK DRIVESHAFT SPLIT COLLAR
- $115.00
- Racepak’s 8-magnet driveshaft split collars are used in conjunction with our driveshaft sensor. These collars will pick up driveshaft RPM sooner than a conventional 2-magnet collar.
- Select options
-
RACEPAK UNIVERSAL EFI INTERFACE MODULE
- $562.00
- The new Universal EFI Interface Module from Racepak streams CAN-based data from aftermarket ECU systems to any Racepak data logger or dash display. This gives the ability to view and record all of the data available from the ECU
- Add to cart
-
- Out of Stock
RED DRAGON FIRE RACE SERIES DISTRIBUTOR FOR HONDA/ACURA 92-95 DOHC VTEC OBD1
- $249.95
- Restore all proper spark in your Honda/Acura with this Complete Brand New Dragon Fire Series Distributor Assembly for all 1992-1995 OBD1 Honda Civic and Acura Integra 1.6L and 1.8L DOHC VTEC. This distributor features a highly durable exterior coating for optimal heat management. All the electronics contained in this distributor exceed OEM specification and are specially designed to give racers…
- Read more
-
-
- Out of Stock
RED DRAGON FIRE RACE SERIES IGNITION DISTRIBUTOR FOR 96-01 HONDA/ACURA OBD2
- $249.95
- Restore proper spark in your Honda with this complete brand new distributor assembly. This distributor features a highly durable exterior coating for optimal heat management. All the electronics contained in this distributor exceed OEM specification and are specially designed to give racers the ultimate and uncompromised spark delivery. Comes complete with cap, rotor, module, coil and all necessary timing/position sensors;…
- Read more
-
-
RELAY HOLDER KIT
- $17.00
- Automotive relay holder for 4 or 5 pin Mini ISO relays (Regular 40A relays)
- Add to cart
-
RELAY W/ BUILT-IN FUSE 40A
- $10.00
- High quality sealed relay which is typically used for ECU, injectors, and coils when building your own harness
- Add to cart
-
REMOTE MOUNT PRESSURE SENSOR BLOCK
- $69.00
- FuelTech's billet remote pressure sensor mounting block is the perfect solution to mount your pressure sensors in one common place
- Add to cart
-
SEALED RELAY 40A
- $19.00
- High quality sealed relay which is typically used for ECU, injectors, and coils when building your own harness
- Add to cart
-
SHIFT KNOB W/ STRAIN GAUGE SENSOR
- $299.00
- Designed to use with FuelTech GearController* to perform powershifts
- Select options
-
SHIFT LIGHT FOR N2MB WOT BOX (KINNETTIC KREATIONS)
- $25.00
- Add a shift light to your N2MB WOT box! Plug into the serial port on the box and set up the shift light in the software. You need to enable it and set an RPM on your computer and it's done!
- Add to cart
-
SHIFTER HANDLE W/ STRAIN GAUGE SENSOR
- $299.00
- Replaces the stock “H” G-Force long levers. Use with FuelTech GearController or FT600 to allow gear change at full load without clutch, in non-clutchless manual transmissions.
- Add to cart
-
SPARK PLUG GAPPER
- $99.00
- The FuelTech spark plug gapper is recommended for the adjustment of the distance between the center and ground electrodes.
- Add to cart
-
SPARKPRO-1
- $129.00 – $138.00
- High energy inductive ignition to be used with ignition coils w/o igniter (dumb coils).
- Select options
-
SPARKPRO-1 HARNESS
- $12.00
- SparkPRO-1 harness
- Add to cart
-
SPARKPRO-2
- $149.00 – $162.00
- High energy inductive ignition to be used with ignition coils w/o igniter (dumb coils).
- Select options
-
SPARKPRO-2 HARNESS
- $18.00
- SparkPRO-2 harness
- Add to cart
-
SPARKPRO-3
- $199.00 – $214.00
- High energy inductive ignition to be used with ignition coils w/o igniter (dumb coils).
- Select options
-
SPARKPRO-3 HARNESS
- $20.00
- SparkPRO-3 harness
- Add to cart
-
SPARKPRO-4
- $239.00 – $258.00
- High energy inductive ignition to be used with ignition coils w/o igniter (dumb coils).
- Select options
-
SPARKPRO-4 HARNESS
- $25.00
- SparkPRO-4 harness
- Add to cart
-
SPARKPRO-5
- $279.00 – $298.00
- High energy inductive ignition to be used with ignition coils w/o igniter (dumb coils).
- Select options
-
SPARKPRO-5 HARNESS
- $25.00
- SparkPRO-5 harness
- Add to cart
-
SPARKPRO-6
- $319.00 – $344.00
- High energy inductive ignition to be used with ignition coils w/o igniter (dumb coils).
- Select options
-
SPARKPRO-6 HARNESS
- $30.00
- SparkPRO-6 harness
- Add to cart
-
SPARKPRO-8
- $379.00 – $408.00
- High energy inductive ignition to be used with ignition coils w/o igniter (dumb coils).
- Select options
-
SPARKPRO-8 HARNESS
- $35.00
- SparkPRO-8 harness
- Add to cart
-
SRT-4 DUAL FUEL PUMP REWIRE HARNESS (KINNETTIC KREATIONS)
- $135.00
- We've developed a plug-and-play wiring harness for those of you with twin/dual fuel pumps. Comes with 2 options depending on how your pumps are wired.
- Select options
-
SRT-4 FUEL PUMP REWIRE HARNESS (SINGLE PUMP) (KINNETTIC KREATIONS)
- $90.00
- Complete harness Totally plug and play for single pump setups!
- Add to cart
-
SRT-4 STAGE 2 TUCKED ENGINE HARNESS (KINNETTIC KREATIONS)
- $560.00
- Brand new tucked SRT-4 engine harnesses. Pre-wired for WOT boxes and the PCM connector detaches from engine harness. Either to later hook up to our tucked engine bay harnesses, or for easily wiring in standalone/piggyback controllers like MS, FIC, or any others.
- Select options
-
SRT4
- $1,650.00 – $2,300.00
- Select options
-
STAGING / BRAKE CONTROL SOLID STATE RELAY
- $69.00 – $86.00
- Select options
-
Staging Brake
- $365.00 – $415.00
- Select options
-
Sunroof Plug
- $90.00 – $210.00
- Select options
-
SWITCHPANEL-5 MINI
- $389.00
- Keypad with 5 configurable buttons and multicolor backlight
- Add to cart
-
SWITCHPANEL-8 MINI
- $399.00
- Keypad with 8 configurable buttons and multicolor backlight
- Add to cart
-
TEMPERATURE SENSOR (0-300°F)
- $55.00 – $61.50
- High quality stainless steel temperature sensor
- Select options
-
THERMOCOUPLE EXPOSED TIP
- $79.00
- Thermocouple Exposed Tip
- Select options
-
- Sale!
This is Awesome Shirt
-
$33.00Original price was: $33.00.$10.00Current price is: $10.00. - Select options
-
THROTTLE POSITION SENSOR (FORD)
- $75.00 – $82.00
- Fits aftermarket throttle bodies such as Accufab Racing and Wilson Manifolds that are designed to fit the 1986-1993 Ford Mustang 5.0L TPS.
- Select options
-
- Out of Stock
Toddler Racing in Training Shirt
- $15.00
- Select options
-
-
TRAVEL SENSOR
- $329.00 – $334.00
- The best way of monitoring your vehicle`s suspension and body movements. Available travel lengths: 0-4", 0-8". Can be used with any FuelTech Power FT ECU.
- Select options
-
TRAVEL SENSOR CONNECTOR KIT
- $6.00
- *Color may vary based on stock availability.
- Add to cart
-
TURBO SPEED SENSOR
- $399.00 – $408.00
- Vital data in order to measure whether the turbo is operating within its compressor map and at its highest efficiency. By inputting blade count you can measure rotational speed and maximise your turbo output, allowing you to gain valuable data on turbo selection. *Note, this sensor will not read until the turbo speed is above 5000 RPM, if spinning the…
- Select options
-
TYPE K THERMOCOUPLE ADAPTER
- $6.00
- Type K Thermocouple Adapter. Use to connector Racepak thermocouples to FuelTech EGT-8 CAN.
- Add to cart
-
USB CABLE (FT600/FT550/FT500/FT500LITE/FT450)
- $5.00
- USB cable for PowerFT line ECUs: FT600 / FT550 / FT500 / FT500LITE / FT450
- Add to cart
-
VACUUM DISTRIBUTION MANIFOLD
- $69.00
- FuelTech's billet vacuum distribution manifold is the perfect solution for running and organizing all of the vacuum lines on your race car. With 7 vacuum ports there is plenty of room to run all of your vacuum lines for blow off valves, wastegates and more!
- Add to cart
-
VR-HALL CONVERTER
- $79.00
- The VR-HALL converter was designed to read an analog VR signal and transform it to a digital signal (Hall)
- Add to cart
-
WATER TEMPERATURE SENSOR
- $30.00 – $35.00
- GM style water temperature sensor. Standard water/coolant sensor for all FuelTech ECUs. Thread size: 3/8" NPT
- Select options
-
WB-O2 NANO
- $179.00 – $323.00
- Select options
-
WB-O2 NANO HARNESS
- $50.00 – $65.00
- WB-O2 Nano harness
- Select options
-
WB-O2 NANO TO ALCOHOL O2 ADAPTER HARNESS
- $149.00
- This adapter is required when using our Alcohol O2 module with our PRO500 or PRO600 harness.
- Add to cart
-
WB-O2 SENSOR BOSCH TO NTK ADAPTER HARNESS
- $79.00
- This adapter is used when running our Alcohol O2 module with our PRO500 or PRO600 harness.
- Add to cart
-
WB-O2 SENSOR NTK TO BOSCH ADAPTER HARNESS
- $79.00
- Adapter harness used to convert your V8 harness from NTK O2 sensors to BOSCH O2 sensors
- Add to cart
-
WOT BOX HARNESS (KINNETTIC KREATIONS)
- $85.00
- 100% plug and play harness to install your N2MB WOT box without having to cut or splice a single wire! Simple unplug your cam sensor, TPS, and C101 (the black 14-pin connector up on the cowl area), install harness in series with them.
- Select options
-
WOT BOX, BOOST BOX, SHIFT LIGHT PACKAGE (KINNETTIC KREATIONS)
- $170.00
- Package deal for N2MB boxes for the SRT-4. Plug and play WOT box harness, boost box harness plus shift light in any color for only $170! Install your new toys with minimal splicing (3 wires for boost box get spliced behind the radio) and tuck them all into your glove box plus get a shift light that flashes when you…
- Add to cart